General Radio Frequency: 433.92MHz
Range: 30m in open area
Extension lead: Sockets: 4
Red indicator light
Mains cable length: 1 .8m
Voltage: 240V AC 50Hz
Max. current: 13A
Max. total power: 3kW
Max. power per socket: 3kW
Approved to the appropriate parts of BS5733,
BSEN 60730, ETSI EN300220
FREQUENTLY ASKED QUESTIONS
Q: What appliances can I use this extension
Answer: As it is 13A rated, it can be used with
any household device. It is most suitable where access is
restricted and for those with restricted movement.
Q: Is the remote controller battery powered?
Yes, it uses battery type A23 12V. The battery
is preinstalled but needs the protective tag removed before first
use. This may involve unscrewing the cover on the back with a
Q: How do I replace the battery?
Answer: Remove the cover on the back of the
hand controller. Use a small screwdriver to remove the screw if
there is one. Replace the battery with an A23 12V battery and
replace the cover. Ensure correct polarity for the battery.
Q: Does it work in concealed locations and
Answer: As it uses radio frequency control it
will work through walls, though its range will be reduced
depending on the material and the thickness of the wall.
Q: How is the radio socket powered? Does it
have a battery?
Answer: The socket uses power directly from the
mains and so requires no battery. The controller requires a
battery for its power.
Q: Can I use more than one of these in the same
room, or do they interfere with each other?
Answer: This is supported, however do not place
two devices in close proximity. This may affect range and
operation of the device. This also applies to the individual
remote sockets. The same controller may also be used to control
the individual sockets provided by Energenie.
Q. What does the green button do?
Answer: In normal operation it toggles all
sockets on/off. The led light above the button will be
continuously on if any socket is on.
Q: Can the extension lead be re-programmed to
work with a different controller?
Answer: Yes, as long as it is from Energenie.
Press and hold for 6 seconds to clear the keycode memory. The
light above will button flash at 1 second intervals awaiting
programming. Press and hold briefly ANY key on the remote until
the light flashes quickly 4 or 5 times indicating programming
accepted. All sockets are then correctly programmed for the hand
controller. The programming process does not affect whether any
socket is on or off at the time.
Q: Can this product be used with any other
remote controls such as my TV remote?
Answer: This is not supported. Most TV remotes
use infrared control.
Q: Is it possible to programme 2 remotes to the
one extension lead?
Answer: No, the current product has no way of
duplicating the hand controller. Each hand controller creates its
own unique code in order to prevent interference from a second or
further hand controllers
Q: Can the socket be used outside?
Answer: No, this product is for indoor use only
Q: Do you have any other remote control
Answer: We have individual sockets. The hand
controller is compatible with the single radio socket.